192.168.o.1.1 is IP address of many WiFi router admin portal. Mainly D-LINK and Netgear routers use 192.168.o.1 as default IP Address. You can change default IP address of your router also if you find it difficult to remember or it is required as per network settings.
Actually 192.168.o.1.1 is not correct private IPv4 IP address whereas 192.168.0.1.1 is correct IP address. Only one equipment or device can use this IP address so that IP conflict issue is not faced. 192.168.o.1.1 is used mostly in brazil
How to Login to 192.168.o.1.1
Connect your laptop to home router by Ethernet cable
Open browser and click on http://192.168.0.1.1
Enter 192.168.o.1 username and password to login. To find default password list click here
192.168.o.1.1 home screen will be displayed
Not able to access 192.168.o.1.1
If you are getting “Page cannot be displayed” error while accessing 192.168.o.1.1, there may be many reasons for same. We will explain reasons below.
First thing is check connection between connected device and router. Re-plug the cable and restart router
Disable anti-virus or any other firewall. May be these are blocking IP address 192.168.o.1.1
Clear browser cache or use different browser. Browser cache can be cleared by pressing Crtl+F5 in browser address bar.
May be 192.168.o.1.1 is not default IP address. Click here to read more about troubleshooting 192.168.o.1.1
Netgear, D-LINK, Sitecom and 2WIRE are some of the major router brands which uses 192.168.o.1.1 as their default IP address. Click here to know how to change router settings from http://192.168.o.1.1